SIEMENS - Combi sensor-actor N502 8xIN 8xOUT 16A - 5WG15021AB02

Siemens 5WG1502-1AB02
Combi switching actuator 8 x AC 230 V, 16 A, 8 x binary inputs

Artikelnummer: N 502/02
EAN code: 4001869421339
Recupel code: -
Batterij bijgeleverd: -

Aanvullende/Extra/Uitgebreidere informatie:
- 8 inputs AC/DC 12...230 V - 8 relay contact outputs - Rated contact voltage AC 230 V - Rated contact operating current 16 A, p.f. = 1 - Electronics power supply via an integrated power supply unit for AC 230 V - Device functional even without bus connection or if bus voltage absent or bus communication interrupted or not yet activated - Push button to switch between bus and direct mode - Push button for each output to switch the output in direct mode via a toggling function by a short actuation and for changing the output mode between remote control relay and time switch relay by holding down the push button for some seconds - Device preset at the factory for direct switching of an output through a toggling function via the input of the same name - Selectable function for each input when using the Engineering Tool Software (ETS): - Switching status / binary value transmission - Switching, short / long operation - Single button dimming, single button sun protection control, 1-button group control (sequence control) - 1-bit scene control - 8-bit scene control, 8-bit value, edge-triggered, 8-bit value, short / long operation - 16-bit floating point value, edge-triggered, 16-bit value, short / long operation, 16-bit value, edge-triggered, 16-bit floating point value, short / long operation - Selectable function for each pair of inputs: - 2-button dimming with stop telegram or with cyclical sending - 2-pushbutton shutter/blind control - Selectable blocking / releasing of each input via a corresponding blocking object - Sending of the input objects after a change of status - Selectable logic operation (AND/OR) for one input with a further communication object and with variable start value of the logic operation at bus voltage recovery - Setting by means of the ETS, whether all outputs are to be configured identically or individually - Selectable mode for each output (normal mode, time switch mode) - Optional addition of a night mode object for each output for time-limited switching On of the output (and hence the illumination) at night - Variable On and Off delay times for each output - Variable On period in night mode or in time switch mode - Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) in night mode or in time switch mode - Optional status object per output for status reporting - Sending of status objects on request and/or automatically after a change - Integrated 8-bit scene control and linking of each output with up to 8 scenes - Selectable switching state for each output at mains or bus power failure as well as after bus or mains voltage recovery - Integrated bus coupling unit with only half a standard bus load - Bus connection via bus terminal or contact system to data rail - Modular installation devices for mounting on TH35 EN 60715 mounting rail